ATD Machinery

U heeft een verouderde browser

Klik hier voor meer informatie over het updaten van uw browser.

Back

RSC – banding and cellophaning

Specifications

  • Speed: Max. 100 cigars / minute
  • Machine dimensions:
    370 x 90 x 220 cm (L x W x H)
  • Machine weight: 2000 kg
  • Power consumption: 4 kW
  • Compressed air: 6 bar
  • Cigar dimensions*:
    Diameter: Min. Ø 7 mm Max. Ø 12 mm
    Length: Min. 70 mm Max. 200 mm

* Other dimensions on request

Download brochure

For banding and film-wrapping of a single cigar, a RSC-machine is used. The cigars are fed into the JL-feeder. At the bottom the cigars are positioned in a single row. The last cigar is taken by a pawl-belt. The pawl belt transports the cigars upwards towards the S-100.

A S-100-machine puts a cigar band around a cigar. Cigar bands are laid in a storage. The cigars are positioned one by one under this storage. A system takes out one cigar band and positions this cigar band on top of the cigar. Just before taking out the cigar band, glue is added (NOTE: cigar bands must be separated, not on bobbin). Directly after laying the cigar band onto the cigar, a clamping unit clamps the cigar band onto the cigar. Spring operated rolls “brushes” the cigar band around the cigar. After banding, the cigars are transported to the C-100.

The C-100 cellophane machine is a machine for wrapping cigars in cellophane or polypropylene film. The cigars are transported into the C-100 machine by a walking beam. The film is fed horizontally from the film bobbin over guide rollers. The desired length of the film is cut-of at the pre-set length by scissors. Directly after cutting the film is folded and sealed around the cigar. To avoid that the cigars-end stick together while being sealed, the pawl-bar transport system is extended. After cellophaning, the cigars are discharged. The complete machine is guarded regarding the latest CE-standards.

Options

  • Perforating system to reach the desired cigar draw
  • Fire-end cutting system
    To cut cigars on the desired length
  • Pre-printed cellophane correction-unit
    To position pre-printed cellophane
  • Print and apply cellophane
    To print a short text on cellophane
  • Tear tape module
    For easy opening of the cigar wrapper

Although there is much more to tell about the performance of this machine, we prefer to do so in person. Please leave your details via the contact page or call us and we will contact you as soon as we can. You can also send us your question directly.

Questions